View P1304UCLXX_2550332.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sidactor ? protection thyristors 143 revised: february 22, 2011 ? 2011 littelfuse, inc. speci?cations are subject to change without notice. please refer to www.littelfuse.com for current information. baseband protection (voice-ds1) sidactor ? multiport series - ms-013 electrical characteristics sidactor ? multiport series ms-013 are designed to protect baseband equipment from overvoltage transients. targeted for voice through ds-1 applications, the series provides a dual port surface mount solution that enables equipment to comply with various global regulatory standards. 1 (r 1 ) 2 (g 1 ) 3 (t 1 ) 6 (t 2 ) 4 (r 2 ) 5 (g 2 ) description features and bene?ts agency approvals agency agency file number e133083 schematic symbol pinout designation 1 2 3 6 5 4 applicable global standards t tia-968-a t tia-968-b t itu k.20/21 enhanced level* t itu k.20/21 basic level t gr 1089 inter-building* t gr 1089 intra-building t iec 61000-4-5 t yd/t 1082 t yd/t 993 t yd/t 950 *a-rated parts require series resistance part number marking v drm @l drm = 5 a v s @100v/s v drm @l drm = 5 a v s @100v/s v t @i t =2.2 amps i h i s i t capacitance v min v max v min v max v max ma min ma max a max pins 1-2, 3-2, 4- 5 , 6- 5 pins 1-3, 4-6 pins 1-2, 3-2, 4- 5 , 6- 5 p0084ualxx p0084ua 6 25 12 50 4 50 800 2.2 see capacitance values table p0304ualxx p0304ua 25 40 50 80 4 50 800 2.2 p0644ualxx p0644ua 58 77 116 154 4 150 800 2.2 p0724ualxx p0724ua 65 88 130 176 4 150 800 2.2 p0904ualxx p0904ua 75 98 150 196 4 150 800 2.2 p1104ualxx p1104ua 90 130 180 260 4 150 800 2.2 p1304ualxx p1304ua 120 160 240 320 4 150 800 2.2 p1504ualxx p1504ua 140 180 280 360 4 150 800 2.2 t low voltage overshoot t low on-state voltage t does not degrade with use t replaces four discrete components t fails short circuit when surged in excess of ratings t low capacitance table continues on next page.
sidactor ? protection thyristors 144 revised: february 22, 2011 ? 2011 littelfuse, inc. speci?cations are subject to change without notice. please refer to www.littelfuse.com for current information. baseband protection (voice-ds1) electrical characteristics (continued) notes: - absolute maximum ratings measured at t a ?$ vomfttpuifsxjtfopufe
- devices are bi-directional - xx = part number suf?x: tp (tube pack) or rp (reel pack). part number marking v drm @l drm = 5 a v s @100v/s v drm @l drm = 5 a v s @100v/s v t @i t =2.2 amps i h i s i t capacitance v min v max v min v max v max ma min ma max a max pins 1-2, 3-2, 4- 5 , 6- 5 pins 1-3, 4-6 pins 1-2, 3-2, 4- 5 , 6- 5 p1804ualxx p1804ua 170 220 340 440 4 150 800 2.2 see capacitance values table p2304ualxx p2304ua 190 260 380 520 4 150 800 2.2 p2604ualxx p2604ua 220 300 440 600 4 150 800 2.2 p3104ualxx p3104ua 275 350 550 700 4 150 800 2.2 p3504ualxx p3504ua 320 400 640 800 4 150 800 2.2 p0084uclxx p0084uc 6 25 12 50 4 50 800 2.2 p0304uclxx p0304uc 25 40 50 80 4 50 800 2.2 p0644uclxx p0644uc 58 77 116 154 4 150 800 2.2 p0724uclxx p0724uc 65 88 130 176 4 150 800 2.2 p0904uclxx p0904uc 75 98 150 196 4 150 800 2.2 p1104uclxx p1104uc 90 130 180 260 4 150 800 2.2 P1304UCLXX p1304uc 120 160 240 320 4 150 800 2.2 p1504uclxx p1504uc 140 180 280 360 4 150 800 2.2 p1804uclxx p1804uc 170 220 340 440 4 150 800 2.2 p2304uclxx p2304uc 190 260 380 520 4 150 800 2.2 p2604uclxx p2604uc 220 300 440 600 4 150 800 2.2 p3104uclxx p3104uc 275 350 550 700 4 150 800 2.2 p3504uclxx p3504uc 320 400 640 800 4 150 800 2.2 part number pin 1-2 / 3-2 (4- 5 / 6- 5 ) tip-ground, ring-ground pin 1-3 (4-6) tip-ring pf min pf max pf min pf max p0084ualxx 25 155 15 90 p0304ualxx 15 140 10 90 p0644ualxx 40 60 20 35 p0724ualxx 35 60 20 35 p0904ualxx 35 55 20 30 p1104ualxx 30 50 15 30 p1304ualxx 25 45 15 25 p1504ualxx 25 40 15 25 p1804ualxx 25 35 10 20 p2304ualxx 25 35 10 20 p2604ualxx 20 35 10 20 p3104ualxx 20 35 10 20 p3504ualxx 20 35 10 20 p0084uclxx 35 285 20 165 p0304uclxx 25 250 10 145 p0644uclxx 55 155 30 90 p0724uclxx 50 145 25 85 p0904uclxx 45 135 25 80 p1104uclxx 45 115 25 65 P1304UCLXX 40 105 20 60 p1504uclxx 35 95 20 55 p1804uclxx 35 90 15 50 p2604uclxx 30 85 15 50 p3104uclxx 30 80 15 45 p3504uclxx 25 75 15 45 capacitance values
sidactor ? protection thyristors 145 revised: february 22, 2011 ? 2011 littelfuse, inc. speci?cations are subject to change without notice. please refer to www.littelfuse.com for current information. baseband protection (voice-ds1) i h i t i s i drm v drm v t +v -v +i -i v s 50 100 0 t r t d 0 peak value half value t C time (s) i pp C peak pulse current C %i pp t r = rise time to peak value t d = decay time to half value waveform = t r x t d v-i characteristics t r x t d pulse waveform 25c case temperature (t c ) - oc 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 ratio of i h i h (t c = 25oc) normalized v s change vs. junction temperature normalized dc holding current vs. case temperature surge ratings series i pp i tsm di/dt 0.2x310 1 0. 5 x700 2 2x10 1 2x10 2 8x20 1 1.2x 5 0 2 10x160 1 10x160 2 10x 5 60 1 10x 5 60 2 5 x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5 x310 1 10x700 2 5 0/60 hz a min a min a min a min a min a min a min a min a min a min a/s max a20 15015090 507575 45 7520500 c 50 500 400 200 150 200 175 100 200 30 500 package symbol parameter value unit modi?ed ms-013 1 2 3 6 5 4 t j operating junction temperature range up c t s storage temperature range up c r 0 ja thermal resistance: junction to ambient 60 c/w thermal considerations -8 -40 -20 0 20 40 60 80 100 120 140 160 -6 -4 0 2 4 6 8 10 12 14 junction temperature (t j ) C c percent of v s change C % 25 c notes: 1 current wavef orm in s 2 voltage wavef orm in s - peak pulse current rating (i pp ) is repetitive and guaranteed for the life of the product. - i pp sbujohtbqqmjdbcmfpwfsufnqfsbuvsfsbohfpg?$up?$ - the device must initially be in thermal equilibrium with -40c < t j < ?$
sidactor ? protection thyristors 146 revised: february 22, 2011 ? 2011 littelfuse, inc. speci?cations are subject to change without notice. please refer to www.littelfuse.com for current information. baseband protection (voice-ds1) time temperature t p t l t s(max) t s(min) 2 5 t p t l t s time to peak temperature (t 2 5 oc to peak) ramp-down ramp-up preheat critical zone t l to t p figure 1 soldering parameters re?ow condition pb-free assembly (see fig. 1) pre heat - temperature min (t s(min) ) ?$ - temperature max (t s(max) ) ?$ - time (min to max) (t s ) 60-180 secs. average ramp up rate (liquidus temp (t l ) to peak) 3c/sec. max. t s(max) to t l - ramp-up rate 3c/sec. max. re?ow - temperature (t l ) (liquidus) ?$ - temperature (t l ) 60-150 secs. peak temp (t p )
?$ time within 5 c of actual peak temp (t p ) 30 secs. max. ramp-down rate 6c/sec. max. time 2 5 c to peak temp (t p ) 8 min. max. do not exceed ?$ physical speci?cations environmental speci?cations lead material copper alloy terminal finish 100% matte-tin plated body material ul recognized epoxy meeting ?ammability classi?cation 94v-0 high temp voltage blocking 80% rated v drm (v ac peak
?$ps?$ 504 or 1008 hrs. mil-std-750 (method 1040) jedec, jesd22-a-101 temp cycling ?$up?$ njoexfmm vqup cycles. mil-std-750 (method 1051) eia/jedec, jesd22-a104 biased temp & humidity 52 v dc ?$
3) vqupist&*" jedec, jesd22-a-101 high temp storage ?$ist.*-45% .fuipe
jedec, jesd22-a-101 low temp storage -65c, 1008 hrs. thermal shock ?$up?$ njoexfmm tfdusbotgfs 10 cycles. mil-std-750 (method 1056) jedec, jesd22-a-106 autoclave (pressure cooker test) ?$ 3) bun vqupist&*" jedec, jesd22-a-102 resistance to solder heat ?$ tfdt.*-45% .fuipe
moisture sensitivity level 3) ?$ ist sfnpxdzdmft ?$1fbl
+&%&$+45% -fwfm part numbering construction variable packing options i pp rating rohs compliant type p = sidactor p xlxx median voltage package type xxx 4 u part marking xxxxxxx xxxxx part marking code (refer to electrical characteristics table) date code
sidactor ? protection thyristors 147 revised: february 22, 2011 ? 2011 littelfuse, inc. speci?cations are subject to change without notice. please refer to www.littelfuse.com for current information. baseband protection (voice-ds1) dimensions ms-013 7o typ e d a b mold split line a 7o typ 7o typ pad outline 0.06 5 (1.6 5 ) 0. 4 60 (11.68) 0.138 (3. 5 0) 0.0 5 9 (1. 5 0) c a f 7o typ g j h dimension are in inches (and millimeters). burr side min length of flat 4 o 96o detail a k bsc* packing options tape and reel speci?cation ms-013 direction of feed 0.700 (17.8) .512 (13.0) arbor hole dia. 12.99 (330) .630 (16.0) dimensions are in inches (and millimeters) .472 (12.0) .157 (4.0) interior of the tube .045 (1.14) .165 (4.19) .150 (3.81) 90? .525 (13.34) a .225 (5.72) message location .310 (7.87) .108 (2.74) .005 20.000 .030 (508.00 0.76) .020 .005 (0.51 0.13) wall typ. .110 (2.79) a 6 dimensions are in inches (and millimeters) tube pack speci?cation ms-013 package type description quantity added suf?x industry standard u modi?ed ms-013 6-pin tape and reel pack 1500 rp eia-481-d modi?ed ms-013 6-pin tube pack 500 (50 per tube) tp n/a dimensions inches millimeters min max min max a 0.360 0.364 9.14 9.25 b 0.352 0.356 8.94 9.04 c 0.400 0.412 10.16 10.46 d 0.043 0.045 1.09 1.13 e 0.047 0.055 1.19 1.40 f 0.293 0.297 7.44 7.54 g 0.289 0.293 7.34 7.44 h 0.089 0.093 2.26 2.36 j 0.041 0.049 1.04 1.24 k 0.020 --- 0.51 --- bsc* 0.133 0.143 3.38 3.63 * bsc = b asic s pacing between c enters

▲Up To Search▲

Price & Availability of P1304UCLXX

	To Download P1304UCLXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .